Ratings Input: 9 to 18 VDC Output: 12 amps peek, 2 amps continuous
Features
- Opto-isolated input.
- High surge current to open large valves.
- 17mA standby current
- Extends battery life by reducing the hold current
- Most valves will hold on a 2% duty-cycle
- 10kHz PWM produces little or no heat in the solenoid or the CoilSaver
- Valves may be kept on continuously without overheating
- Allows the use of a much smaller easier to carry battery
The firmware listing and schematic are provided so you can customize.